3dct8.cn-女自慰喷水免费观看WWW久久,国产成人午夜精华液,麻豆一区二区三区蜜桃免费,久久亚洲国产成人精品无码区

咨詢熱線

13761090949

當前位置:首頁   >  產品中心  >  二維材料  >  鈣鈦礦  >  鈣鈦礦材料 DPP-DTT

鈣鈦礦材料 DPP-DTT

簡要描述:Luminosyn™ DPP-DTT (also referred to as PDPP2T-TT-OD) is now available featuring

  • 產品型號:
  • 廠商性質:生產廠家
  • 更新時間:2024-06-03
  • 訪  問  量:2719

詳細介紹

Luminosyn™ DPP-DTT (also referred to as PDPP2T-TT-OD) is now available featuring:

 

High molecular weight - higher molecular weight offers higher charge mobility

High purity - DPP-DTT is purified via Soxhlet extraction with methanol, hexane and chlorobenzene under an argon atmosphere

Batch-specific GPC data - so you have confidence in what you are ordering. Also, GPC data is always convenient for your thesis and publications

Large quantity orders - so you can plan your experiments with polymer from the same batch

 

價格

Batch

Quantity

Price

M315

100 mg

4800.45

M315

250 mg

8011.45

M315

500 mg

12635.29

M315

1g

20871.50

M315

2g

36926.50

*for 5 - 10 grams order quantity, the lead time is 4-6 weeks.

 

Batch Details

Batch

Mw

Mn

PDI

M314

292,200

74,900

3.90

M315

278,781

76,323

3.65

 

General Information

Synonyms

PDBT-co-DTT

PTT-DTDPP

PDPP-DTT

DPPT-TT

DPP-TTT

PDPP2T-TT

PDPP2T-TT-OD

DPPDTT

Poly[2,5-(2-octyldodecyl)-3,6-diketopyrrolopyrrole-alt-5,5-(2,5-di(thien-2-yl)thieno [3,2-b]thiophene)]

CAS number

1260685-66-2 (1444870-74-9)

Chemical formula

(C60H88N2O2S4)n

HOMO/LUMO

HOMO = -5.2 eV, LUMO = -3.5 eV [2]

Solubility

Chloroform, chlorobenzene and dichlorobenzene

Classification/Family

Bithiophene, Thienothiophene, Organic semiconducting materials, Low band-gap polymers, Organic photovoltaics, Polymer solar cells, OFETs

 

Chemical structure and product image of DPP-DTT, CAS No. 260685-66-2.

 

OFET and Sensing Applications
The exceptional high mobility of this polymer of up to 10 cm2/Vs [2] via solution-processed techniques, combined with its intrinsic air stability (even during annealing) has made PDPP2T-TT-OD of significant interest for OFET and sensing purposes.

While the highest mobilities require exceptional molecular weights of around 500 kD (and with commensurate solubility issues), high mobilities in the region of 1-3 cm2/Vs can still be achieved with good solution-processing at around 250 kD. As such, we have made a range of molecular weights available to allow for different processing techniques.

In our own tests, we have found that by using simple spin-coating onto an OTS-treated silicon substrate (using our prefabricated test chips), high mobilities comparable to the literature can be achieved  (1-3 cm2/Vs). Further improvements may also be possible with more advanced strain-inducing deposition techniques.

Example OFET characteristics for DPP-DTT (M313) solution processed from chlorobenzene on a 300 nm SiO2 substrate treated with OTS. Output characteristic (top left), transfer curves (top right), mobility fitting (bottom left) and calculated mobility (bottom right).

 

Photovoltaic Applications
Although shown as a promising hole-mobility polymer for OFETs, when used as the donor material in a bulk heterojunction photovoltaic (with PC70BM as the acceptor), initial efficiencies of 1.6% were achieved for DPP-DTT [3]. The low device metrics were attributed to poor film morphology. However, a higher efficiency of 6.9% was achieved by using thicker film (220 nm) [4].

PDPP2T-TT-OD has also recently been used successfully as an active-layer dopant material in PTB7-based devices [5]. An improvement in device performance was observed, with average efficiencies increasing from 7.6% to 8.3% when the dopant concentration of DPP-DTT was 1 wt%. The use of DPP-DTT as a high-mobility hole-interface layer for perovskite hybrid devices has also been investigated [6].

Synthetic route
DPP-DTT synthesis: DPP-DTT was synthesised by following the procedures described in [2] and [3] (please refer to the following references):

With 2-thiophenecarbonitrile and dimethyl succinate as starting materials in t-amyl alcohol, it gave 3,6-Dithiophen-2-yl-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione. Alkylation of 3,6-Dithiophen-2-yl-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione with 2-octyldodecylbromide in dimethylformamide afforded 3,6-bis(thiophen-2-yl)-2,5-bis(2-octyldodecyl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione. Further bromination gave 3,6-bis(5-bromothiophen-2-yl)-2,5-bis(2-octyldodecyl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione (M1).

Further reaction of M1 with 2,5-bis(trimethylstannyl)thieno[3,2-b]thiophene (M2) under Stille coupling conditions gave the target polymer DPP-DTT, which was further purified via Soxhlet extraction with methanol, hexane and then chloroform.

具體價格請咨詢在線客服 

產品咨詢

留言框

  • 產品:

  • 您的單位:

  • 您的姓名:

  • 聯系電話:

  • 常用郵箱:

  • 省份:

  • 詳細地址:

  • 補充說明:

  • 驗證碼:

    請輸入計算結果(填寫阿拉伯?dāng)?shù)字),如:三加四=7

聯系我們

上海巨納科技有限公司 公司地址:上海市虹口區寶山路778號海倫國際大廈5樓   技術支持:化工儀器網
  • 聯系人:袁文軍
  • QQ:494474517
  • 公司座機:86-021-56830191
  • 郵箱:yuanwenjun@sunano.com.cn

掃一掃 更多精彩

微信二維碼

網站二維碼